sane-magicolor(5)         (10 Jan 2011)         sane-magicolor(5)

     NAME
          sane-magicolor - SANE backend for KONICA MINOLTA magicolor
          scanners

     DESCRIPTION
          The sane-magicolor backend supports KONICA MINOLTA magicolor
          scanners connected via USB or LAN. Currently, only the magi-
          color 1690MF device is supported, no other devices with the
          same scanning protocol are known.

     SUPPORTED DEVICES
          The following scanner should work with this backend:

          Device Details
          -----------------------------
          Vendor: KONICA MINOLTA
          Model: magicolor 1690MF

     CONFIGURATION
          This section describes the backend's configuration file
          entries. The file is located at:

               /etc/sane.d/magicolor.conf

          For a proper setup, at least one of the following entries
          are needed:

               net autodiscovery
               net [IP ADDRESS] [DEVICE-ID]
               usb
               usb [VENDOR-ID] [DEVICE-ID]

     FILES
          /etc/sane.d/magicolor.conf
               The backend configuration file

          /usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.a
               The static library implementing this backend.

          /usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so
               The shared library implementing this backend (present
               on systems that support dynamic loading).

     ENVIRONMENT
          SANE_CONFIG_DIR
               This environment variable specifies the list of direc-
               tories that may contain the configuration file.  Under

     Page 1                       Plan 9             (printed 5/24/22)

     sane-magicolor(5)         (10 Jan 2011)         sane-magicolor(5)

               UNIX, the directories are separated by a colon (`:'),
               under OS/2, they are separated by a semi-colon (`;').
               If this variable is not set, the configuration file is
               searched in two default directories: first, the current
               working directory (".") and then in /etc/sane.d. If the
               value of the environment variable ends with the direc-
               tory separator character, then the default directories
               are searched after the explicitly specified directo-
               ries.  For example, setting SANE_CONFIG_DIR to
               "/tmp/config:" would result in directories /tmp/config,
               ., and /etc/sane.d being searched (in this order).

          SANE_DEBUG_MAGICOLOR
               If the library was compiled with debug support enabled,
               this environment variable controls the debug level for
               this backend.  Higher debug levels increase the ver-
               bosity of the output.

               Example: export SANE_DEBUG_MAGICOLOR=127

               To obtain debug messages from the backend, set this
               environment variable before calling your favorite fron-
               tend (e.g.  xscanimage(1)).

               Example: SANE_DEBUG_MAGICOLOR=65 xscanimage

     KNOWN BUGS AND RESTRICTIONS
          Large color scans may sometimes timeout due to unknown rea-
          sons (the scanner simply stops returning data)

          Cancelling large scans may lock up the scanner.

     SEE ALSO
          sane(7),
          http://wiki.kainhofer.com/hardware/magicolor_scan

     AUTHOR
          Reinhold Kainhofer <reinhold@kainhofer.com>

     Page 2                       Plan 9             (printed 5/24/22)