sane-nec(5)               (14 Jul 2008)               sane-nec(5)

     NAME
          sane-nec - SANE backend for NEC scanners

     DESCRIPTION
          The sane-nec library implements a SANE (Scanner Access Now
          Easy) backend that provides access to NEC SCSI scanners.
          This backend should be considered alpha-quality software!
          In the current state it is known to work with PC-IN500/4C
          scanners. Another MultiReader scanner series is not sup-
          ported. PC-IN 500/4C and MultiReader scanner are only sold
          in Japan (except Multi Reader PetiScan).

          For other scanners, it may or may not work.

          The backend has the following known problems:

               - ColorLineart mode is not supported.

               - Device name is fixed to /dev/scanner

          At present, the following scanners are known to work with
          this backend.

               Vendor Product id
               ------ -----------
               NEC    PC-IN500/4C

     FILES
          /etc/sane.d/nec.conf
               The backend configuration file.

          /usr/lib/x86_64-linux-gnu/sane/libsane-nec.a
               The static library implementing this backend.

          /usr/lib/x86_64-linux-gnu/sane/libsane-nec.so
               The shared library implementing this backend (present
               on systems that support dynamic loading).

     ENVIRONMENT
          SANE_DEBUG_NEC
               If the library was compiled with debug support enabled,
               this environment variable controls the debug level for
               this backend.  E.g., a value of 128 requests all debug
               output to be printed.  Smaller levels reduce verbosity.

     SEE ALSO
          sane(7), sane-scsi(5)

     Page 1                       Plan 9             (printed 5/26/22)

     sane-nec(5)               (14 Jul 2008)               sane-nec(5)

     AUTHORS
          Kazuya Fukuda

     Page 2                       Plan 9             (printed 5/26/22)