sane-sm3600(5)            (14 Jul 2008)            sane-sm3600(5)

     NAME
          sane-sm3600 - SANE backend for Microtek scanners with M011
          USB chip

     DESCRIPTION
          The sane-sm3600 library implements a SANE (Scanner Access
          Now Easy) backend that provides access to some Microtek
          scanners with the Toshiba M011 custom USB chip.  This back-
          end should be considered alpha.

          There are also backends for Microtek scanners with SCSI com-
          mand set.  Refer to sane-microtek(5) and sane-microtek2(5)
          for details.

          At present, the following scanners are known positively to
          work with this backend:

               Vendor     Product id:     Remark:
               --------   --------------  -----------
               Microtek   ScanMaker 3600  all modes ok
               Microtek   ScanMaker 3700  reported to work
               Microtek   ScanMaker 3750  reported to work

          If you own a Microtek scanner with the M011 chip other than
          the ones listed above, it may or may not work with SANE!

     FRONTEND OPTIONS
          This backend dynamically enables the options for the fron-
          tend, that are supported by the scanner dependent on the
          scanning-mode and other options. Unsupported options are
          disabled.

          The following options are supported by the Microtek2-driver:

          Color, grayscale, halftone and lineart scans.

          contrast, brightness, control, gamma correction.

     DEVICE NAMES
          This backend does not support device names in a standardized
          form.

     CONFIGURATION
          This backend does not support a configuration file right
          now.

     Page 1                       Plan 9             (printed 5/26/22)

     sane-sm3600(5)            (14 Jul 2008)            sane-sm3600(5)

     FILES
          /usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.a
               The static library implementing this backend.

          /usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so
               The shared library implementing this backend (present
               on systems that support dynamic loading).

     ENVIRONMENT
          SANE_DEBUG_SM3600
               If the library was compiled with debug support enabled,
               this environment variable controls the debug level for
               this backend.  E.g., a value of 128 requests all debug
               output to be printed.  Smaller levels reduce verbosity.
               To see error messages on stderr set SANE_DEBUG_SM3600
               to 1.

               E.g. just say:
               export SANE_DEBUG_SM3600=5

     SEE ALSO
          sane(7), sane-microtek(5), sane-microtek2(5)
          http://sm3600.sourceforge.net

     AUTHOR
          Marian Eichholz <eichholz@computer.org>
          Glenn Ramsey <glenn@componic.com>

     Page 2                       Plan 9             (printed 5/26/22)