sane-tamarack(5)          (14 Jul 2008)          sane-tamarack(5)

          sane-tamarack - SANE backend for Tamarack flatbed scanners

          The sane-tamarack library implements a SANE (Scanner Access
          Now Easy) backend that provides access to the following
          Tamarack flatbed scanners:

               Artiscan 6000C
               Artiscan 8000C
               Artiscan 12000C

          This backend expects device names of the form:


          Where special is the path-name for the special device that
          corresponds to a SCSI scanner. The special device name must
          be a generic SCSI device or a symlink to such a device.  The
          program sane-find-scanner(1) helps to find out the correct
          device. Under Linux, such a device name could be /dev/sga or
          /dev/sge, for example.  See sane-scsi(5) for details.

               The backend configuration file (see also description of
               SANE_CONFIG_DIR below).

               The static library implementing this backend.

               The shared library implementing this backend (present
               on systems that support dynamic loading).

               This environment variable specifies the list of direc-
               tories that may contain the configuration file.  Under
               UNIX, the directories are separated by a colon (`:'),
               under OS/2, they are separated by a semi-colon (`;').
               If this variable is not set, the configuration file is
               searched in two default directories: first, the current
               working directory (".") and then in /etc/sane.d. If the
               value of the environment variable ends with the direc-
               tory separator character, then the default directories
               are searched after the explicitly specified directo-
               ries.  For example, setting SANE_CONFIG_DIR to

     Page 1                       Plan 9             (printed 5/24/22)

     sane-tamarack(5)          (14 Jul 2008)          sane-tamarack(5)

               "/tmp/config:" would result in directories tmp/config,
               ., and /etc/sane.d being searched (in this order).

               If the library was compiled with debug support enabled,
               this environment variable controls the debug level for
               this backend.  Higher debug levels increase the ver-
               bosity of the output.

               Example: export SANE_DEBUG_TAMARACK=4

          sane(7), sane-find-scanner(1), sane-scsi(5)

          Roger Wolff

     Page 2                       Plan 9             (printed 5/24/22)