LVRENAME(8)    (LVM TOOLS 2.03.11(2) (2021-01-08))    LVRENAME(8)

     NAME
          lvrename - Rename a logical volume

     SYNOPSIS
          lvrename position_args
              [ option_args ]

     DESCRIPTION
          lvrename renames an existing LV or a historical LV (see
          lvremove for historical LV information.)

     USAGE
          lvrename VG LV LV_new
              [ COMMON_OPTIONS ]

          lvrename LV LV_new
              [ COMMON_OPTIONS ]

          Common options for command:
              [ -A|--autobackup y|n ]
              [    --noudevsync ]
              [    --reportformat basic|json ]

          Common options for lvm:
              [ -d|--debug ]
              [ -h|--help ]
              [ -q|--quiet ]
              [ -t|--test ]
              [ -v|--verbose ]
              [ -y|--yes ]
              [    --commandprofile String ]
              [    --config String ]
              [    --driverloaded y|n ]
              [    --lockopt String ]
              [    --longhelp ]
              [    --nolocking ]
              [    --profile String ]
              [    --version ]

     OPTIONS
          -A|--autobackup y|n
               Specifies if metadata should be backed up automatically
               after a change.  Enabling this is strongly advised! See
               vgcfgbackup(8) for more information.

          --commandprofile String
               The command profile to use for command configuration.
               See lvm.conf(5) for more information about profiles.

          --config String

     Page 1                    Red Hat, Inc.         (printed 5/24/22)

     LVRENAME(8)    (LVM TOOLS 2.03.11(2) (2021-01-08))    LVRENAME(8)

               Config settings for the command. These override
               lvm.conf settings.  The String arg uses the same format
               as lvm.conf, or may use section/field syntax.  See
               lvm.conf(5) for more information about config.

          -d|--debug ...
               Set debug level. Repeat from 1 to 6 times to increase
               the detail of messages sent to the log file and/or
               syslog (if configured).

          --driverloaded y|n
               If set to no, the command will not attempt to use
               device-mapper.  For testing and debugging.

          -h|--help
               Display help text.

          --lockopt String
               Used to pass options for special cases to lvmlockd.
               See lvmlockd(8) for more information.

          --longhelp
               Display long help text.

          --nolocking
               Disable locking.

          --noudevsync
               Disables udev synchronisation. The process will not
               wait for notification from udev. It will continue
               irrespective of any possible udev processing in the
               background. Only use this if udev is not running or has
               rules that ignore the devices LVM creates.

          --profile String
               An alias for --commandprofile or --metadataprofile,
               depending on the command.

          -q|--quiet ...
               Suppress output and log messages. Overrides --debug and
               --verbose.  Repeat once to also suppress any prompts
               with answer 'no'.

          --reportformat basic|json
               Overrides current output format for reports which is
               defined globally by the report/output_format setting in
               lvm.conf.  basic is the original format with columns
               and rows.  If there is more than one report per
               command, each report is prefixed with the report name
               for identification. json produces report output in JSON
               format. See lvmreport(7) for more information.

     Page 2                    Red Hat, Inc.         (printed 5/24/22)

     LVRENAME(8)    (LVM TOOLS 2.03.11(2) (2021-01-08))    LVRENAME(8)

          -t|--test
               Run in test mode. Commands will not update metadata.
               This is implemented by disabling all metadata writing
               but nevertheless returning success to the calling
               function. This may lead to unusual error messages in
               multi-stage operations if a tool relies on reading back
               metadata it believes has changed but hasn't.

          -v|--verbose ...
               Set verbose level. Repeat from 1 to 4 times to increase
               the detail of messages sent to stdout and stderr.

          --version
               Display version information.

          -y|--yes
               Do not prompt for confirmation interactively but always
               assume the answer yes. Use with extreme caution.  (For
               automatic no, see -qq.)

     VARIABLES
          VG
               Volume Group name.  See lvm(8) for valid names.

          LV
               Logical Volume name.  See lvm(8) for valid  names.   An
               LV positional arg generally includes the VG name and LV
               name, e.g. VG/LV.

          String
               See the option description for  information  about  the
               string content.

          Size[UNIT]
               Size is an input number that accepts an optional  unit.
               Input  units  are  always  treated  as base two values,
               regardless of capitalization, e.g.  'k'  and  'K'  both
               refer  to 1024.  The default input unit is specified by
               letter,  followed  by  |UNIT.   UNIT  represents  other
               possible  input units: bBsSkKmMgGtTpPeE.  b|B is bytes,
               s|S is sectors of 512 bytes, k|K is KiB,  m|M  is  MiB,
               g|G  is GiB, t|T is TiB, p|P is PiB, e|E is EiB.  (This
               should not be confused with the output control --units,
               where capital letters mean multiple of 1000.)

     ENVIRONMENT VARIABLES
          See lvm(8) for information about environment variables  used
          by   lvm.    For   example,  LVM_VG_NAME  can  generally  be
          substituted for a required VG parameter.

     EXAMPLES
          Rename "lvold" to "lvnew":

     Page 3                    Red Hat, Inc.         (printed 5/24/22)

     LVRENAME(8)    (LVM TOOLS 2.03.11(2) (2021-01-08))    LVRENAME(8)

          lvrename /dev/vg02/lvold vg02/lvnew

          An alternate syntax to rename "lvold" to "lvnew":
          lvrename vg02 lvold lvnew

     SEE ALSO
          lvm(8) lvm.conf(5) lvmconfig(8)

          pvchange(8)  pvck(8)  pvcreate(8)   pvdisplay(8)   pvmove(8)
          pvremove(8) pvresize(8) pvs(8) pvscan(8)

          vgcfgbackup(8)    vgcfgrestore(8)    vgchange(8)     vgck(8)
          vgcreate(8)     vgconvert(8)     vgdisplay(8)    vgexport(8)
          vgextend(8)    vgimport(8)    vgimportclone(8)    vgmerge(8)
          vgmknodes(8)   vgreduce(8)  vgremove(8)  vgrename(8)  vgs(8)
          vgscan(8) vgsplit(8)

          lvcreate(8)    lvchange(8)     lvconvert(8)     lvdisplay(8)
          lvextend(8)  lvreduce(8) lvremove(8) lvrename(8) lvresize(8)
          lvs(8) lvscan(8)

          lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8)
          blkdeactivate(8) lvmdump(8)

          dmeventd(8)    lvmpolld(8)     lvmlockd(8)     lvmlockctl(8)
          cmirrord(8) lvmdbusd(8)

          lvmsystemid(7)    lvmreport(7)     lvmraid(7)     lvmthin(7)
          lvmcache(7)

     Page 4                    Red Hat, Inc.         (printed 5/24/22)