VGCK(8)        (LVM TOOLS 2.03.11(2) (2021-01-08))        VGCK(8)

     NAME
          vgck - Check the consistency of volume group(s)

     SYNOPSIS
          vgck option_args position_args
              [ option_args ]
              [ position_args ]

     DESCRIPTION
          vgck checks LVM metadata for consistency.

     USAGE
          Read and display information about a VG.

          vgck
              [    --reportformat basic|json ]
              [ COMMON_OPTIONS ]
              [ VG|Tag ... ]

          Rewrite VG metadata to correct problems.

          vgck --updatemetadata VG
              [ COMMON_OPTIONS ]

          Common options for command:

          Common options for lvm:
              [ -d|--debug ]
              [ -h|--help ]
              [ -q|--quiet ]
              [ -t|--test ]
              [ -v|--verbose ]
              [ -y|--yes ]
              [    --commandprofile String ]
              [    --config String ]
              [    --driverloaded y|n ]
              [    --lockopt String ]
              [    --longhelp ]
              [    --nolocking ]
              [    --profile String ]
              [    --version ]

     OPTIONS
          --commandprofile String
               The command profile to use for command configuration.
               See lvm.conf(5) for more information about profiles.

          --config String
               Config settings for the command. These override
               lvm.conf settings.  The String arg uses the same format

     Page 1                    Red Hat, Inc.         (printed 5/24/22)

     VGCK(8)        (LVM TOOLS 2.03.11(2) (2021-01-08))        VGCK(8)

               as lvm.conf, or may use section/field syntax.  See
               lvm.conf(5) for more information about config.

          -d|--debug ...
               Set debug level. Repeat from 1 to 6 times to increase
               the detail of messages sent to the log file and/or
               syslog (if configured).

          --driverloaded y|n
               If set to no, the command will not attempt to use
               device-mapper.  For testing and debugging.

          -h|--help
               Display help text.

          --lockopt String
               Used to pass options for special cases to lvmlockd.
               See lvmlockd(8) for more information.

          --longhelp
               Display long help text.

          --nolocking
               Disable locking.

          --profile String
               An alias for --commandprofile or --metadataprofile,
               depending on the command.

          -q|--quiet ...
               Suppress output and log messages. Overrides --debug and
               --verbose.  Repeat once to also suppress any prompts
               with answer 'no'.

          --reportformat basic|json
               Overrides current output format for reports which is
               defined globally by the report/output_format setting in
               lvm.conf.  basic is the original format with columns
               and rows.  If there is more than one report per
               command, each report is prefixed with the report name
               for identification. json produces report output in JSON
               format. See lvmreport(7) for more information.

          -t|--test
               Run in test mode. Commands will not update metadata.
               This is implemented by disabling all metadata writing
               but nevertheless returning success to the calling
               function. This may lead to unusual error messages in
               multi-stage operations if a tool relies on reading back
               metadata it believes has changed but hasn't.

          --updatemetadata

     Page 2                    Red Hat, Inc.         (printed 5/24/22)

     VGCK(8)        (LVM TOOLS 2.03.11(2) (2021-01-08))        VGCK(8)

               Update VG metadata to correct problems.  If VG metadata
               was updated while a PV was missing, and the PV
               reappears with an old version of metadata, then this
               option (or any other command that writes metadata) will
               update the metadata on the previously missing PV. If a
               PV was removed from a VG while it was missing, and the
               PV reappears, using this option will clear the outdated
               metadata from the previously missing PV. If metadata
               text is damaged on one PV, using this option will
               replace the damaged metadata text. For more severe
               damage, e.g. with headers, see pvck(8).

          -v|--verbose ...
               Set verbose level. Repeat from 1 to 4 times to increase
               the detail of messages sent to stdout and stderr.

          --version
               Display version information.

          -y|--yes
               Do not prompt for confirmation interactively but always
               assume the answer yes. Use with extreme caution.  (For
               automatic no, see -qq.)

     VARIABLES
          VG
               Volume Group name.  See lvm(8) for valid names.

          Tag
               Tag name.  See lvm(8) for information about  tag  names
               and using tags in place of a VG, LV or PV.

          String
               See the option description for  information  about  the
               string content.

          Size[UNIT]
               Size is an input number that accepts an optional  unit.
               Input  units  are  always  treated  as base two values,
               regardless of capitalization, e.g.  'k'  and  'K'  both
               refer  to 1024.  The default input unit is specified by
               letter,  followed  by  |UNIT.   UNIT  represents  other
               possible  input units: bBsSkKmMgGtTpPeE.  b|B is bytes,
               s|S is sectors of 512 bytes, k|K is KiB,  m|M  is  MiB,
               g|G  is GiB, t|T is TiB, p|P is PiB, e|E is EiB.  (This
               should not be confused with the output control --units,
               where capital letters mean multiple of 1000.)

     ENVIRONMENT VARIABLES
          See lvm(8) for information about environment variables  used
          by   lvm.    For   example,  LVM_VG_NAME  can  generally  be
          substituted for a required VG parameter.

     Page 3                    Red Hat, Inc.         (printed 5/24/22)

     VGCK(8)        (LVM TOOLS 2.03.11(2) (2021-01-08))        VGCK(8)

     SEE ALSO
          lvm(8) lvm.conf(5) lvmconfig(8)

          pvchange(8)  pvck(8)  pvcreate(8)   pvdisplay(8)   pvmove(8)
          pvremove(8) pvresize(8) pvs(8) pvscan(8)

          vgcfgbackup(8)    vgcfgrestore(8)    vgchange(8)     vgck(8)
          vgcreate(8)     vgconvert(8)     vgdisplay(8)    vgexport(8)
          vgextend(8)    vgimport(8)    vgimportclone(8)    vgmerge(8)
          vgmknodes(8)   vgreduce(8)  vgremove(8)  vgrename(8)  vgs(8)
          vgscan(8) vgsplit(8)

          lvcreate(8)    lvchange(8)     lvconvert(8)     lvdisplay(8)
          lvextend(8)  lvreduce(8) lvremove(8) lvrename(8) lvresize(8)
          lvs(8) lvscan(8)

          lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8)
          blkdeactivate(8) lvmdump(8)

          dmeventd(8)    lvmpolld(8)     lvmlockd(8)     lvmlockctl(8)
          cmirrord(8) lvmdbusd(8)

          lvmsystemid(7)    lvmreport(7)     lvmraid(7)     lvmthin(7)
          lvmcache(7)

     Page 4                    Red Hat, Inc.         (printed 5/24/22)