VGMKNODES(8)   (LVM TOOLS 2.03.11(2) (2021-01-08))   VGMKNODES(8)

     NAME
          vgmknodes - Create the special files for volume group
          devices in /dev

     SYNOPSIS
          vgmknodes
              [ option_args ]
              [ position_args ]

     DESCRIPTION
          vgmknodes checks the LVM device nodes in /dev that are
          needed for active LVs and creates any that are missing and
          removes unused ones.

          This command should not usually be needed if all the system
          components are interoperating correctly.

     USAGE
          vgmknodes
              [    --ignorelockingfailure ]
              [    --refresh ]
              [    --reportformat basic|json ]
              [ COMMON_OPTIONS ]
              [ VG|LV|Tag ... ]

          Common options for lvm:
              [ -d|--debug ]
              [ -h|--help ]
              [ -q|--quiet ]
              [ -t|--test ]
              [ -v|--verbose ]
              [ -y|--yes ]
              [    --commandprofile String ]
              [    --config String ]
              [    --driverloaded y|n ]
              [    --lockopt String ]
              [    --longhelp ]
              [    --nolocking ]
              [    --profile String ]
              [    --version ]

     OPTIONS
          --commandprofile String
               The command profile to use for command configuration.
               See lvm.conf(5) for more information about profiles.

          --config String
               Config settings for the command. These override
               lvm.conf settings.  The String arg uses the same format
               as lvm.conf, or may use section/field syntax.  See

     Page 1                    Red Hat, Inc.         (printed 5/25/22)

     VGMKNODES(8)   (LVM TOOLS 2.03.11(2) (2021-01-08))   VGMKNODES(8)

               lvm.conf(5) for more information about config.

          -d|--debug ...
               Set debug level. Repeat from 1 to 6 times to increase
               the detail of messages sent to the log file and/or
               syslog (if configured).

          --driverloaded y|n
               If set to no, the command will not attempt to use
               device-mapper.  For testing and debugging.

          -h|--help
               Display help text.

          --ignorelockingfailure
               Allows a command to continue with read-only metadata
               operations after locking failures.

          --lockopt String
               Used to pass options for special cases to lvmlockd.
               See lvmlockd(8) for more information.

          --longhelp
               Display long help text.

          --nolocking
               Disable locking.

          --profile String
               An alias for --commandprofile or --metadataprofile,
               depending on the command.

          -q|--quiet ...
               Suppress output and log messages. Overrides --debug and
               --verbose.  Repeat once to also suppress any prompts
               with answer 'no'.

          --refresh
               If the LV is active, reload its metadata.  This is not
               necessary in normal operation, but may be useful if
               something has gone wrong, or if some form of manual LV
               sharing is being used.

          --reportformat basic|json
               Overrides current output format for reports which is
               defined globally by the report/output_format setting in
               lvm.conf.  basic is the original format with columns
               and rows.  If there is more than one report per
               command, each report is prefixed with the report name
               for identification. json produces report output in JSON
               format. See lvmreport(7) for more information.

     Page 2                    Red Hat, Inc.         (printed 5/25/22)

     VGMKNODES(8)   (LVM TOOLS 2.03.11(2) (2021-01-08))   VGMKNODES(8)

          -t|--test
               Run in test mode. Commands will not update metadata.
               This is implemented by disabling all metadata writing
               but nevertheless returning success to the calling
               function. This may lead to unusual error messages in
               multi-stage operations if a tool relies on reading back
               metadata it believes has changed but hasn't.

          -v|--verbose ...
               Set verbose level. Repeat from 1 to 4 times to increase
               the detail of messages sent to stdout and stderr.

          --version
               Display version information.

          -y|--yes
               Do not prompt for confirmation interactively but always
               assume the answer yes. Use with extreme caution.  (For
               automatic no, see -qq.)

     VARIABLES
          VG
               Volume Group name.  See lvm(8) for valid names.

          LV
               Logical Volume name.  See lvm(8) for valid  names.   An
               LV positional arg generally includes the VG name and LV
               name, e.g. VG/LV.

          Tag
               Tag name.  See lvm(8) for information about  tag  names
               and using tags in place of a VG, LV or PV.

          String
               See the option description for  information  about  the
               string content.

          Size[UNIT]
               Size is an input number that accepts an optional  unit.
               Input  units  are  always  treated  as base two values,
               regardless of capitalization, e.g.  'k'  and  'K'  both
               refer  to 1024.  The default input unit is specified by
               letter,  followed  by  |UNIT.   UNIT  represents  other
               possible  input units: bBsSkKmMgGtTpPeE.  b|B is bytes,
               s|S is sectors of 512 bytes, k|K is KiB,  m|M  is  MiB,
               g|G  is GiB, t|T is TiB, p|P is PiB, e|E is EiB.  (This
               should not be confused with the output control --units,
               where capital letters mean multiple of 1000.)

     ENVIRONMENT VARIABLES
          See lvm(8) for information about environment variables  used
          by   lvm.    For   example,  LVM_VG_NAME  can  generally  be

     Page 3                    Red Hat, Inc.         (printed 5/25/22)

     VGMKNODES(8)   (LVM TOOLS 2.03.11(2) (2021-01-08))   VGMKNODES(8)

          substituted for a required VG parameter.

     SEE ALSO
          lvm(8) lvm.conf(5) lvmconfig(8)

          pvchange(8)  pvck(8)  pvcreate(8)   pvdisplay(8)   pvmove(8)
          pvremove(8) pvresize(8) pvs(8) pvscan(8)

          vgcfgbackup(8)    vgcfgrestore(8)    vgchange(8)     vgck(8)
          vgcreate(8)     vgconvert(8)     vgdisplay(8)    vgexport(8)
          vgextend(8)    vgimport(8)    vgimportclone(8)    vgmerge(8)
          vgmknodes(8)   vgreduce(8)  vgremove(8)  vgrename(8)  vgs(8)
          vgscan(8) vgsplit(8)

          lvcreate(8)    lvchange(8)     lvconvert(8)     lvdisplay(8)
          lvextend(8)  lvreduce(8) lvremove(8) lvrename(8) lvresize(8)
          lvs(8) lvscan(8)

          lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8)
          blkdeactivate(8) lvmdump(8)

          dmeventd(8)    lvmpolld(8)     lvmlockd(8)     lvmlockctl(8)
          cmirrord(8) lvmdbusd(8)

          lvmsystemid(7)    lvmreport(7)     lvmraid(7)     lvmthin(7)
          lvmcache(7)

     Page 4                    Red Hat, Inc.         (printed 5/25/22)